Omron FZ3 Series User Manual page 87

Set value
Setting item [Factory
default]
[None]
Image
Only NG
Logging
All
3.
Set the logging images save destination.
Note
In order to perform fast logging, image files are first saved in the controller memory.Note, however, that
●
the controller memory for saving images is a ring memory. If the maximum number of save images is
reached, images will be overwritten starting with the oldest saved image if further images are saved.
Reference: About Number of Logging Images (p.292)
Also, the controller memory is cleared if the power is turned off.
To keep images, select "Save to memory + file" and save images to USB memory, etc.
Setting item
[Save to memory]
Destination
Save to memory + file
When "Save to memory + file" in "Destination" is selected, set the destination and file names.
Setting item
[Factory default]
[RAMDisk]
●
Folder name
USBDisk
●
—
Prefix
Switch
Checked
●
saving folder
[Unchecked]
●
by scene
Switch
Checked
●
saving folder
[Unchecked]
●
by judge
FZ3 User's Manual
No images are saved.
When logging images with the processing item "Image Logging",
select [None].
Only images with an overall judgement of NG are saved.
All measured images are saved.
Note, however, that some images may not be saved if "Measurement"
is set in "Logging priority" in step 4.
Set value
[Factory default]
Saves to the controller memory.
Images saved to the controller memory are saved to a
USBDisk or RAMDisk as files.
Set value
Specify the image file save destination (RAMDisk or USB
memory).Logging images are saved in the specified save
destination folder.
Set the prefix for the save file name.
The set character string is added at the beginning of the name
of the save file.
If checked, folders that correspond to scene numbers are
automatically created and image files are divided by scene
and saved.
If checked, OK/NG folders are automatically created and
image files are divided by scene and saved.
Description
Description
Description
Useful Functions for Operation
3
85