Omron FZ3 Series User Manual page 184

Item
Continuous
measurement
Scene
switch
Scene group
switch
6
Clearing
Measurement
Values
Clear Error
Clear
Parallel
OR+DO
0: OFF 1:ON
Note
When the input command is not received correctly, the ERROR signal turns on.
●
Important
During parallel continuous measurement and when the STEP signal is input continuously, do not perform
●
switching of the scene group. When this is performed, set "Unchecked" in "Save scene group on switch scene"
in either of the settings items below.
Switch Scene Group window Reference:
●
[Measure setting] in the [Measure] menu Reference: Setting Conditions Related to Operation during Measurement (p.108)
●
Output Format
Each time measurement is performed, the measurement result is output.
Output can be selected to turn on either when the judgement result is OK or when it is an NG error.The
factory default setting is "ON at NG".
Reference:
Signal
OR Signal
182 Controlling/Outputting through Parallel Communication
Description
Measure continuously
during input of commands.
Switch measurement
scenes.
Switch measurement
scene groups.
Clear measurement
values.
The OR signal and DO
signal are not cleared.
Clear error output.
The ERROR indicator is
also cleared.
Clear the OR signal and
DO signal.
Setting Communication Specifications (Parallel Interface) (p.178)
Overall judgement results are output.
Input format (DI7 to DI0)
Execute Command
(DI7) (DI6, DI5)
1 00
1 01
1 11
1 10
1 10
1 10
Switching Scene Groups (p.50)
Output contents
Command information
Input example
(DI4 to 0)
*****
The controller does
Input Example:
not see this signal, so
10000000
a setting of either 0 or
1 makes no difference.
Switch to scene
Input "Scene No." in 2.
binary format. Input Example:
10100010
Switch to scene
Input "Scene Group group 2.
No." in binary format. Input Example:
11100010
Input Example:
00000
11000000
Input Example:
00001
11000001
Input Example:
00010
11000010
FZ3 User's Manual