Omron FZ3 Series User Manual page 129

2.
In the communication setting area, set the following items.
Setting item
Interface
Baud rate [bps]
[Note 1]
Data length [bit]
Parity
Stop bit [bit]
Flow control
FZ3 User's Manual
Set value
[Factory default]
[RS-232C]
●
Adjust to the PLC communication specifications.
RS-422
●
2400
●
4800
●
[9600]
●
19200 Adjust to the PLC communication specifications.
●
38400
●
57600
●
115200
●
[7]
●
8
●
None
●
Odd
●
Adjust to the PLC communication specifications.
[Even]
●
1
●
[2]
●
Flow control is not performed with software.
If the time in which there is no response from
external devices reaches the timeout setting time,
[None]
a timeout error occurs and an error message is
displayed in the window.The parallel interface
ERROR signal also turns on.
Flow control is performed with software.Data is
Xon/Xoff sent according to the Xon/Xoff codes from
external devices.
Communicating through Serial Communication (PLC Link)
Description
6
127