Dash Back Cover Replacement - Precor Experience 700 Series Service Manual

Dash Back Cover Replacement

Dash Back Cover Replacement
ID
Removal Instructions
1. Remove the back cover
fasteners first and then the remaining four top screws. Carefully hold the cover from
falling while removing the fasteners. Retain part(s) and/or fastener(s) for installation.
Installation Instructions
1. Reinstall and hold the back cover
screws first followed by the remaining three bottom screws. Fully tighten all fasteners.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Description
Dash Back Cover
Dash Front Cover
. Start by removing the bottom three #3 Phillips screw
Covers and Panels Replacement
into position. Then install the top four #3 Phillips
6 Replacement Procedures
Page 104