Line Type - ADC Release 3.1 User Manual

1152700 Issue 1 February 2001 Section 2 Operation and Maintenance
DLP-754
Page 4 of 7
NE AND CARD TYPE/
SLOT INFORMATION.
SELECT DS1 CHANNEL
CARD REPRESENTATION
WITH REAL TIME ALARM
INDICATIONS.
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER.
Figure 754-2. T3 TMUX Multi 1 T1 Level Configuration Screen
Table 754-2. T3 TMUX Multi 1 T1 Channel Configuration Options
SELECTION DEFAULT
Administrative State Unlocked
Service Type CRS

Line Type

Extended
Superframe
Loopback Config None
Far End Loopback None
Page 2-248
© 2000, ADC Telecommunications, Inc.
Cellworx Vision: Card View - T3 TMUX Multi 1 Mother Card
NE Name: Cellworx1 Status:
NE Id: 1
Configuration:
Card: T3 TMUX MULTI 1 / TMUX E
Card Level
Slot Number: 9
Port Number: 1
Slot: 3 Slot: 4
Channel Number:
Administrative State:
T3 TMUX TMUX
Locked
MULTI 1 EXP
Unlocked
Port Level
DS3 Port
Administrative State:
Locked
Unlocked
ADC ADC
Line Type:
Status Status
Extended Superframe
Active Active
Protect Protect
Superframe
Port
Far End Loopback:
1
Facility Data Link (FDL):
Circuit Identifier:
Line Coding: AMI
Apply Chassis View
RETURNS TO CHASSIS
VIEW WITHOUT CLOSING
CARD LEVEL VIEW.
OPTIONS
Unlocked
Locked
CES
CRS
Extended
Superframe
Superframe
NotApplicable
None
Facility Line
None
Payload
Reset
Line
X
Congestion Thresholds:
Ingress: 80 %
Egress: %
80
DS1 Channel
Service Type:
Circuit Emulation (CES)
Cell Relay (CRS)
Loopback Config:
None
Facility Line
None
None
default
Refresh Close
REPAINTS WINDOW CLOSES CARD LEVEL
TO REFLECT ANY VIEW AND RETURNS TO
CHANGES. SHELF LEVEL VIEW.
DEFINITIONS
Enables or disables channel for service,
respectively.
Circuit Emulation Service.
Cell Relay Service.
Only for CES mode.
No Loopback has been activated.
Activates a facility loopback.
No loopback has been requested for far
end. Options only available with FDL on.
Requests a Payload loopback for far end.
Resets a loopback at the far end.
Requests a loopback for the line at the far
end.
CLICK ON BOX AND DRAG
UP OR DOWN TO WIDEN
STATUS OR CONFIGURATION
VIEWS.
CARD LEVEL
CONFIGURATION OPTIONS.
CLICK ON BOX AND DRAG UP
OR DOWN TO WIDEN PORT
LEVEL VIEW.
TOGGLE BETWEEN DS3 PORT
AND DS1 CHANNEL USING TABS.
DS1 CHANNEL LEVEL
CONFIGURATION OPTIONS.
USE SLIDERS TO VIEW
HIDDEN SELECTIONS.
14589-A
(continued)