ADC Release 3.1 User Manual page 460

1152700 Issue 1 February 2001 Section 2 Operation and Maintenance
Table 797-2. ATM Interface Configuration Options, continued
SELECTION DEFAULT
Recording Interface All 0s
ID
UNI/ NNI Select UNI
CAC Formula PCR
Traffic Policing Enable
Cell Scrambling True
Subscription Rate 100
Max Active 0
VPI/VCI Bits
Max number of 4096
VPCs
Max number of 0
VCCs
Figure 797-2. 622 SM CRS ATM Port Interface Configuration Screen
Page 2-440
© 2000, ADC Telecommunications, Inc.
OPTIONS
Numeric Identifies the site card and port location for
customer billing capabilities, (allows
assignment of a customer ID for each port.)
The code is limited to 15 numeric characters.
UNI Specifies interface type as User to Network
NNI Interface or Network to Network Interface.
PCR Specifies Peak Cell Rate or Sustained Cell Rate
SCR for Connection Admission Control calculations.
Enable User sets whether traffic will be policed for
Disable Quality Of Service (QOS).
True or False User sets whether traffic will be scrambled.
PCR: 100 to 1000 User sets depending on traffic contract.
SCR: 1 to 100
0 to 12 Sets maximum number of bits allowed to select
virtual channel from.
0-4096 Sets maximum number of virtual path circuits
that may be assigned on this port.
0-8192 Sets maximum number of virtual channel
circuits that may be assigned on this port.
DLP-797
Page 4of 4
DEFINITIONS