ADC Release 3.1 User Manual page 128

1152700 Issue 1 February 2001 Section 2 Operation and Maintenance
DLP-713
Page 2 of 5
10. The fourth section of the window lists generic troubles that are available for alarm retrieval.
Select the desired generic troubles for the alarm report either one at a time, each followed
with the >> button, or all of them by selecting the ALL>> button. For a complete listing of
alarms, refer to Section 4, Troubleshooting Guidelines.
11. Once the alarm filter has been customized to retrieve the alarms desired, select the Apply
button to save the changes or select Close to abort any changes and close the screen.
12. The selected alarms for the 15-minute time specified in the Interval (GMT) dialog box are
displayed in chronological order under the Filtered Traps section of the window. Refer to
Figure 713-2. For a list of GUI alarms and troubleshooting tips, refer to the TAP section of
this document.
Stop! You have completed this procedure.
File
Page 2-108
2000, ADC Telecommunications, Inc.
Cellworx Vision Subnetwork Management System
Configuration Fault Performance
Alarms
Configure NE Alarm Threshold...
NMIC Protection
NMIC Protection Restoration
Figure 713-1. Cellworx Vision Fault Pull Down Menu
10916-D