Iso9000 Compliance - ADC Release 3.1 User Manual

ISO9000 Compliance

ADC Telecommunications Inc. is ISO 9001 certified.
STANDARDS
The following listing is a bibliography of applicable documents:
ANSI/IEEE Std 802.1D,1993 Edition.
ANSI T1.403-1989, Carrier to Customer Installation: T1 Metallic Interface, February 22, 1989
ATM UNI specification 3.1, ATM Forum
Bellcore GR-253-CORE, Synchronous Optical Network (SONET) Transport Systems:
Bellcore GR-1110-CORE,
Bellcore GR-1113-CORE,
Bellcore GR-1117-CORE,
Bellcore GR-1244-CORE,
Bellcore GR-1248-CORE,
Bellcore GR-1400-CORE,
Bellcore GR-20-CORE,
Bellcore GR-253-CORE,
Bellcore GR-2837-CORE,
Bellcore GR-2842-CORE,
Bellcore GR-2848-CORE,
Bellcore GR-436-CORE,
Bellcore TR-TSY-000496,
Common Generic Criteria, Issue 2, 12/95
Broadband Switching System Generic Requirements,
Issue 1, 9/94, Revision 3, 4/96
Asynchronous Transfer Mode (ATM) and ATM Adaptation
Layer (AAL) Protocols, Bellcore.
Generic Requirements for Exchange PVC CRS Customer
Network Management Service, Bellcore.
Clocks for the Synchronized Network: Common Generic
Criteria, Bellcore.
"Generic Requirements for Operations of ATM Network
Elements (NEs)," Issue 3, 8/96
SONET Dual-fed Unidirectional Path Switched Ring (UPSR)
Equipment Generic Criteria, Bellcore.
Generic Requirements for Optical Fiber and Optical Fiber Cable,
Bellcore.
SONET Transport Systems: Common Criteria, Bellcore.
"ATM Virtual Path Functionality in SONET Rings—Generic
Criteria," Issue 2, 12/95
"ATM Service Access Multiplexer (SAM) Generic
Requirements," Issue 1, 11/94
Broadband Multi-service UNI Generic Requirements, Bellcore.
Digital Network Synchronization Plan, Bellcore.
Issue 2, September 1989, Supplement 1, September 1991
1152700 Issue 1 February 2001 Preface
© 2000, ADC Telecommunications, Inc.
Page xi