ADC Release 3.1 User Manual page 113

7. To gain status information of a certain connection, the user double clicks on the connection
using the left mouse button, or single clicks to highlight the connection followed by
selecting Status at the bottom left of the window.
8. The Subnetwork Connection Status window appears. Refer to
connection name is displayed at the top of the window. The administrative state may show
as Locked or Unlocked. Locked indicates the connection is taken down at both ends, no
traffic is allowed on the ring. Unlocked indicates the connection is operable in a normal
state. The user may change options on the connection by selecting Configure. Access to the
Configure screen can also be obtained from the previous Subnetwork Connection screen via
the Configure selection button.
9. The Subnetwork Connection Configuration screen appears. Refer to
the connection name is displayed at the top of the window. The connection can be taken
down by changing the Administrative State to Locked using the button at the top right
corner of the window and then selecting Apply.
10. The administrator can configure either or both ends of the connection as OAM cell segment
endpoints by selecting the Segment Endpoint box displayed at each end of the connection.
This functionality can be used for maintenance or troubleshooting purposes. Select Apply to
send configuration changes to the database or close to abort any changes.
11. Depending on what type of connection was selected, certain fields may be grayed out and
not configurable. For options available for subnetwork connection configurations, refer to
Table 710-2.
12. The configuration change completed window appears. Select OK.
Stop! You have completed this procedure.
File
1152700 Issue 1 February 2001 Section 2 Operations and Maintenance
Cellworx Vision Subnetwork Management System
Configuration Fault Performance
Time and Date
Connection
Create...
Topology View ...
Configure Traffic Contract ...
Software
Configure Service Provider Profile ...
NMIC Platform
View Ring Resource Usage ...
View Fiber Bandwidth Usage ...
Figure 710-1. Cellworx Vision Connection Menu Tree
DLP-710
Page 2 of 6
Figure 710-5. The
Figure 710-6. Again
10963-D
Page 2-93
© 2000, ADC Telecommunications, Inc.