ADC Release 3.1 User Manual page 209

Cellworx Vision : Add Ring NE - Connect Fiber
Connect the physical fiber to the transmit port of
the left Ring Interface Card on network element
and the receive port of the left Ring Interface Card
on the new network element.
Connect the physical fiber to the receive port of the
left Ring Interface Card on network element
and the transmit port of the left Ring Interface Card
on the new network element.
Cancel
Figure 737-7. Cellworx Vision Add Ring NE Connect New NE Fibers
Cellworx Vision : Add Ring NE - Wait for Boot-up
Waiting for new network element to boot...
Normal boot time should not exceed five minutes
Elapsed time: 9
Figure 737-8. Cellworx Vision Wait For NE to Boot
Cellworx Vision: Add NE - Boot Time Exceeded
Normal boot time for the network element has
 
been exceeded. This could be the result of a
communication failure with the network element.
Please check all cables and the network element's
status via craft interface if necessary.
Retry
Figure 737-9. Add NE Boot Time Exceeded Window
1152700 Issue 1 February 2001 Section 2 Operation and Maintenance
West Node (id 1)
East Node (id 2)
Next>>
Cancel
Quit
DLP-737
Page 6 of 8
X
11725-BC
X
11759-C
X
0026-046
Page 2-189
2000, ADC Telecommunications, Inc.