ADC Release 3.1 User Manual page 373

CLICK ON THE UP OR DOWN ARROWS TO INCREASE OR DECREASE THE
VALUE WHICH PROVIDES EXPONENTIAL SMOOTHING FOR ALARM NOTICES
THAT REPORT/RESPOND TO FR BUFFER CONGESTION
Smoothing Constant:
Ingress:
Low Buffer Congestion Threshold:
Abatement
0
High Buffer Congestion Threshold:
Abatement
0
SELECT THE BLACK BLOCK AND DRAG
TO THE DESIRED BUFFER CONGESTION
THRESHOLD FOR ALARM ABATEMENT.
THIS VALUE WILL BE 10 PERCENT LESS
THAN THE THRESHOLD ONSET.
Figure 784-2. FRS Buffer Congestion Threshold Settings
Port Mode:
Ports 1 and 2 Channelized; Ports 5 and 6 disabled
Ports 1, 2, 5, and 6 Fractional
Ports 3 and 4 Channelized; Ports 7 and 8 disabled
Ports 3, 4, 7, and 8 Fractional
SELECT THE DESIRED PORT CONFIGURATION AND THEN
HIT THE APPLY BUTTON. NOTE THAT IF SELECTING
CHANNELIZED CONFIGURATION, PORTS 5 AND 6, AND/OR
7 AND 8 WILL NOT BE SELECTABLE FOR INTERFACE
CONFIGURATION.
Figure 784-3. FRS Port Mode Settings
1152700 Issue 1 February 2001 Operation and Maintenance
0.3
40
Onset
65
Onset
SELECT THE RED BLOCK AND DRAG
TO THE DESIRED BUFFER CONGESTION
THRESHOLD FOR ALARM ONSET. ANY
CELLS TAGGED AS DISCARD ELIGIBLE
FOR ANY INTERFACE AND PORT MAY BE
DISCARDED ONCE THIS THRESHOLD IS
CROSSED.
0026-021
DLP-784
Page 4 of 7
100
100
0026-001
Page 2-353
© 2000, ADC Telecommunications, Inc.