ADC Release 3.1 User Manual page 273

DLP-755
Page 2 of 5
C. CES INTERFACE CONFIGURATION
13. Single click on the port to be assigned as a Circuit Emulation Service port.
14. Select the Circuit Emulation Service option on the Port Level Service Type followed by the
Apply button at the bottom of the screen.
15. Double click on the port to bring up the CES interface screen. Refer to the example shown
in Figure 755-3.
16. Set the CES configuration options as needed using Table 755-3 as a reference.
17. Select the Apply button and then the Close button to return to the T1 card display.
18. Repeat steps 3 through 6 for each T1 Multi 1 port on the card.
19. Select the Close button to return to the Chassis View window.
20. Repeat steps 1 through 20 for each card in the shelf.
Stop! You have completed this procedure.
NE Name: Cellworx1
NE Id: 1
NE AND CARD TYPE/
Card: T1 MULTI 1
SLOT INFORMATION.
Slot Number: 8
Port Number: 1
CARD REPRESENTATION
WITH REAL TIME ALARM
INDICATIONS.
CLICK ON THE PORT TO
CONFIGURE INDIVIDUAL
DS1 PORTS.
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER.
1152700 Issue 1 February 2001 Section 2 Operation and Maintenance
Cellworx Vision: Card View - T1 Circuit Emulation Service
Status:
Configuration:
Card Level
Administrative State:
Locked
T1 MULTI
Unlocked
1
Port Level
Administrative State:
Locked
Unlocked
Service Type:
Circuit Emulation (CES)
ADC
Cell relay (CRS)
Line Build Out (LBO):
Status
Active
Line Coding:
APS
Line Type:
Port
Facility Data Link (FDL):
1 1 9
2 2
10
Far End Loopback: None
3 3 11
4 4 12
5 5 13
Send Code:
6 6 14
7 7
15
Loopback Config:
8 8 16
Apply Chassis View
RETURNS TO CHASSIS
VIEW WITHOUT CLOSING
CARD LEVEL VIEW.
Figure 755-1. T1 Multi 1 Card Configuration Window
X
Congestion Thresholds:
80 %
Ingress:
Egress: %
80
Transmit Timing Source:
Received
Local
0-133 feet
B8ZS
Extended Superframe
None
Looped or normal data
None
Refresh Close
REPAINTS WINDOW CLOSES CARD LEVEL
TO REFLECT ANY VIEW AND RETURNS TO
CHANGES. SHELF LEVEL VIEW.
© 2000, ADC Telecommunications, Inc.
CLICK ON BOX AND DRAG
UP OR DOWN TO WIDEN
STATUS OR CONFIGURATION
VIEWS.
CARD LEVEL
CONFIGURATION OPTIONS.
CLICK ON BOX AND DRAG UP
OR DOWN TO WIDEN PORT
LEVEL VIEW.
DS1 PORT LEVEL
CONFIGURATION OPTIONS.
SELECT PORT FIRST.
USE SLIDERS TO VIEW
HIDDEN SELECTIONS.
13448-C
Page 2-253