ADC Release 3.1 User Manual page 262

1152700 Issue 1 February 2001 Section 2 Operation and Maintenance
DLP-753
Page 2 of 4
NE Name: Cellworx1
NE Id: 1
NE AND CARD TYPE/
Card: T3 CRS
SLOT INFORMATION.
Slot Number: 9
Port Number: 1
CARD REPRESENTATION
WITH REAL TIME ALARM
INDICATIONS.
CLICK ON THE PORT TO
CONFIGURE INDIVIDUAL
DS1 PORTS.
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER.
SELECTION DEFAULT
Slot # 2
Admin State LOCKED
(Card or Port)
Congestion 0
Threshold
Ring Selection Auto
Expansion Shelf Not Selected
Interface
Page 2-242
© 2000, ADC Telecommunications, Inc.
Cellworx Vision: Card View - T3 Cell Relay Service
Status:
Configuration:
Card Level
Administrative State:
Locked
T3
Unlocked
CRS
Ring Selection:
Auto
Expansion Shelf Interface
Timing Port:
None
Port Level
Administrative State:
ADC
Locked
Status Status
Unlocked
Active
Active
Protect Protect
Circuit Identifier:
Timing
Timing
Line Type:
Port
M23
1
C-bit Parity
2
3
Line Coding: B3ZS
Line Build Out (LBO):
0-150 feet
Loopback Config:
Apply Chassis View
RETURNS TO CHASSIS
VIEW WITHOUT CLOSING
CARD LEVEL VIEW.
Figure 753-1. T3 CRS Configuration Screen
Table 753-1. T3 CRS Configuration Options
OPTIONS
2 to 15 for Ring NE
2 to 15 for STN-
EPS
LOCKED/
UNLOCKED
0 to 100
Auto
Ring 16
Ring 17
Selected
Not Selected
X
Congestion Thresholds:
80
Ingress: %
Egress: %
80
Ring 16 Ring 17
Port 1 Port 2 Port 3
ATM Mapping Type
PLCP
Direct
default
Transmit Timing Source:
Recieved
Local
150-450 feet
Refresh Close
CLOSES CARD LEVEL
REPAINTS WINDOW
VIEW AND RETURNS TO
TO REFLECT ANY
SHELF LEVEL VIEW.
CHANGES.
DEFINITIONS
Physical slot locations of the T3 cards in the
shelf.
Locked = Out of service.
Unlocked = In service.
Threshold for CLP=1 cells to be discarded on
the ingress/egress path.
Card will automatically select traffic from the
ring direction with the best signal.
Card will receive traffic from Ring 16 direction.
Card will receive traffic from Ring 17 direction.
Determines if the card is being used as an
expansion shelf interface (SEPIC) in an EPS or
RNE. Click on the box to select it.
CLICK ON BOX AND DRAG
UP OR DOWN TO WIDEN
STATUS OR CONFIGURATION
VIEWS.
CARD LEVEL
CONFIGURATION OPTIONS.
CLICK ON BOX AND DRAG UP
OR DOWN TO WIDEN PORT
LEVEL VIEW.
T3 CRS PORT LEVEL
CONFIGURATION OPTIONS.
USE SLIDERS TO VIEW
HIDDEN SELECTIONS.
13450-C
(continued)