ADC Release 3.1 User Manual page 58

ADCP-70-220 Issue 1 November 2000 Section 2 Operation and Maintenance
Summary: This procedure outlines the steps required to create ATM Virtual Path Connections
(VPC) and Virtual Channel Connections (VCC) through the Cellworx STN network. A VCC is
an individual channel between two communicating systems. The VPC allows multicasting of
several VCCs to ease routing between switches where multiple VCCs share a common path. The
VPCs are a common requirement of WAN installations. The administrator should have acquired
a work order defining the bandwidth requirements, service type, and Quality of Service (QoS)
for each connection before proceeding.
1. Creating traffic contracts.
2. Create an ATM VP or VC connection through the Cellworx
STN system.
3. Create an ATM VP Multicast Connection.
4. Create an ATM Bundled VC Multicast Connection.
5. Add a Leaf Endpoint to an In-Service Connection.
Stop! You have completed this procedure.
Page 2-28
© 2000, ADC Telecommunications, Inc.
CREATING CONNECTIONS
NTP-013
Page 1 of 1
DLP-709
DLP-708
DLP-787
DLP-790
DLP-791