Table of Contents
Advertisement
E-mail.
Important note
110/148
Siemens Building Technologies
HVAC Products
6.3.2 Information from the ISP
The ISP must provide the settings for the following data points to allow the web server
OZW775 to send e-mails. See Section 4.3.2 for information on the data points.
Command sequence: Settings > Communication > E-mail
Data point
Address mail server
Default val:
smtp.example.com
Setting val:
Internet Provider
Port number mail server
Default val:
25
Setting val:
1...65535
Internet Provider
E-mail address sender
Default val:
ozw775@example.com
Setting val: Internet Provider
Authentication mail server
Default val:
No
Setting val:
No, Yes
User name
Default val:
(Blank)
Setting val:
Name, max. 20
alphanum.
characters
Password
Default val:
(Blank)
Setting val:
Password, max. 20
alphanum.
characters
The web server OZW775 does not support HTTPS (Hyper Text Transfer Protocol
Secure). The e-mails are sent unsecured and unencrypted, i.e. without:
SSL (Secure Sockets Layer)
TSL (Transport Layer Security)
"Authentication mail server = Yes" checks unsecured, unencrypted information in the
data points "User name" and "Password" from the mail server for each e-mail traffic.
Commissioning instructions OZW775 V2.01
Communication via Ethernet
Information from the ISP
Settings for IP address or name (domain), max. 20
alphanumeric characters.
..........................................................................
Port number mail server 25 (must not normally be
changed). Setting if not default:
..........................................................................
Settings for IP address or name (domain), max. 20
alphanumeric characters.
..........................................................................
Mail server authentication setting:
..........................................................................
User name setting (login to mail server and
authentication of e-mails by mail server):
..........................................................................
Password setting (login to mail server and authentication
of e-mails by mail server):
..........................................................................
Network protocol for secure data transmission.
Protocol for encryption of data transmissions on the
Internet.
CE1C5663en
22.06.2012
Advertisement
Table of Contents
