Table of Contents
Advertisement
Message receiver 1...4
Siemens Building Technologies
HVAC Products
Command sequence: Settings > Message receiver > Message receiver 1...4
Data point
Message receiver 1...4
Default val:
(Blank)
Setting val:
Name
Receiver type
Default val:
---
Setting val:
---
ACS alarm*
Mobile phone
E-mail
Fax machine.
Pager
Interface
Default val:
USB
Setting val:
USB
Modem
Ethernet*
Transmission protocol
Default val:
ACS protocol
Setting val:
ACS protocol
UCP
TAP
SMTP
SMS GSM,
SMS GSM service
Fax protocol
* ACS alarm via Ethernet from ACS CD V5.10
Receiver type
Interface
--- (Default)
E-mail
Ethernet
ACS alarm
USB
Modem
Ethernet
Mobile phone
Modem
Fax
Modem
Pager
Modem
1) Modem type, see command sequence: Settings > Communication > Modem.
2) ACS alarm via Ethernet from ACS CD V5.10
No other selection
-
Value cannot be set or no value entry required.
xx
No modem required.
Italics/Bold
Default value.
Example: Receiver type
Interface
Transmission protocol
Commissioning instructions OZW775 V2.01
Parameterize OZW775
Explanation, example
Ref. DP "Message receiver 1" (1...4) allows for
entering the name (text) with max. 20
alphanumeric characters.
The name is displayed as information text in
ACS and in messages.
Ref. DP "Receiver type" allows you to configure
the type of message receiver. The following
data points depend on the setting value:
"Interface" (USB, modem, Ethernet) and,
depending on "Interface", the "Modem type" and
the "Transmission protocol".
Setting value "---" does not determine the
receiver type, i.e. the message receiver is
inactive.
Setting value USB / Modem / Ethernet connects
the receiver (FB "Message receiver", receiver
1...4) to the corresponding interface.
The setting value depends on the data point
configuration for "Modem type", "Receiver type",
and "Interface". See the setting values for data
point "Transmission protocol" in the table below.
Modem type
-
Analog/ISDN
GSM
2)
Analog/ISDN
GSM
Analog
GSM
Analog/ISDN
GSM
= E-mail.
= Ethernet
(Default if receiver type = E-mail).
= SMTP
(Default if receiver type = E-mail).
1)
Transmission protocol
-
-
xx
SMTP
xx
ACS protocol
xx
TAP
UCP
SMS GSM
Fax protocol
Fax protocol
SMS GSM service
TAP
TAP
SMS GSM service
CE1C5663en
–
–
–
–
65/148
22.06.2012
Advertisement
Table of Contents
