Routing Engine Srx5K-Re-13-20 Specifications - Juniper SRX5600 Hardware Manual

Services gateway
Hide thumbs Also See for SRX5600:
Table of Contents

Advertisement

Routing Engine SRX5K-RE-13-20 Specifications

The SRX5K-RE-13-20 Routing Engine
Junos operating system (Junos OS). Software processes that run on the Routing Engine maintain the routing
tables, manage the routing protocols used on the device, control the device interfaces, control some chassis
components, and provide the interface for system management and user access to the device.
Figure 36: Routing Engine
You must install at least one Routing Engine in the services gateway. You can install a second Routing
Engine if both Routing Engines are running Junos OS Release 10.0 or later. A second Routing Engine is
required if you are using the dual chassis cluster control link feature available in Junos OS Release 10.0
and later. The second Routing Engine does not perform all the functions of a Routing Engine and does not
improve resiliency or redundancy. The second Routing Engine and the Switch Control Board (SCB) in which
it is installed do not constitute a host subsystem. The only function of the second Routing Engine is to
enable the hardware infrastructure that enables the chassis cluster control 1 port on the Services Processing
Card (SPC) used for chassis cluster control links. If you install only one Routing Engine in the services
gateway, you must install it in the slot in the front panel of SCB0. If you install a second Routing Engine
to use the dual chassis cluster control link feature, you install it in the slot in the front panel of SCB1.
The Routing Engine consists of the following components:
CPU—Runs Junos OS to maintain the services gateway's routing tables and routing protocols. It has a
Pentium-class processor.
DRAM—Provides storage for the routing and forwarding tables and for other Routing Engine processes.
USB port—Provides a removable media interface through which you can install Junos OS manually. Junos
supports USB version 1.0.
Internal flash disk—Provides primary storage for software images, configuration files, and microcode.
The disk is a fixed compact flash and is inaccessible from outside the services gateway.
Hard disk—Provides secondary storage for log files, memory dumps, and rebooting the system if the
internal compact flash disk fails.
(Figure 36 on page
84) is an Intel-based PC platform that runs the
84

Advertisement

Table of Contents
loading

Table of Contents