Flex I/O Card (Srx5K-Fpc-Ioc) Specifications - Juniper SRX5600 Hardware Manual

LEDs
Serial Number Location

Flex I/O Card (SRX5K-FPC-IOC) Specifications

The SRX5K-FPC-IOC Flex I/O card (Flex IOC)
port modules that add Ethernet ports to your services gateway. A Flex IOC with installed port modules
functions in the same way as a regular IOC, but allows greater flexibility in adding different types of Ethernet
ports to your services gateway.
Each Flex IOC has a processor subsystem, which includes a 1.2-GHz CPU, a system controller, 1 GB
SDRAM, and two Packet Forwarding Engines with a maximum throughput of 10 Gbps each.
You must install at least one IOC in the services gateway. The IOC can be of any of the available IOC or
Flex IOC types.
OK/FAIL LED, one bicolor:
Steady green–The IOC is operating normally.
Red–The IOC has failed and is not operating normally.
Off–The IOC is powered down.
The serial number label is located as shown in
Figure 73: SRX5K-4XGE-XFP Serial Number Label
OK /F AIL
(Figure 74 on page
Figure 73 on page
Serial number
ID label
AA567 8
149) is an IOC with two slots that accept
148
148.