Flex I/O Card Port Module Srx-Ioc-16Ge-Tx Specifications - Juniper SRX5600 Hardware Manual

Serial Number Location

Flex I/O Card Port Module SRX-IOC-16GE-TX Specifications

You use port modules and Flex I/O Cards (Flex IOCs) to add different combinations of small form-factor
pluggable transceiver (SFP), 10-gigabit SFP transceiver (XFP), and copper ports to your services gateway
to suit the specific needs of your network. The SRX-IOC-16GE-TX port module
installs into a Flex IOC to add sixteen 10/100/1000 Ethernet RJ-45 copper ports.
Figure 78: Flex IOC Port Module SRX-IOC-16GE-TX
Description
Software release
Cables and connectors
Controls
Supported Slots
The serial number label is located as shown in
Figure 77: Port Module SRX-IOC-16GE-SFP Serial Number Label
Port module with sixteen 10/100/1000 Ethernet RJ45 ports
Maximum throughput: 10 Gbps
Oversubscription ratio: 1.6:1
Maximum configurable MTU: 9192 bytes
Junos OS Release 9.5R1 and later
Sixteen RJ-45 1-Gbps ports
ONLINE Button–The ONLINE button on the port module front panel toggles the port
module online and offline.
Either slot in SRX5K-FPC-IOC Flex IOC
Figure 77 on page
Serial number
ID label
JX0123
152.
(Figure 78 on page 152)
152