Srx5600 Services Gateway Dc Power Supply Leds - Juniper SRX5600 Hardware Manual

Table 20: DC Power System Specifications
Item
Redundancy
Output power (maximum) per
power supply
Output power (maximum) per
system

SRX5600 Services Gateway DC Power Supply LEDs

Each DC power supply faceplate contains three LEDs that indicate the status of the power supply (see
Table 21 on page 57). In addition, a power supply failure triggers the red alarm LED on the craft interface.
NOTE: An SCB must be present for the PWR OK LED to go on.
Table 21: DC Power Supply LEDs
Label Color
PWR OK Green
Specification
Standard-Capacity
2+2
1600 W
3200 W
State Description
Off Power supply is not functioning normally. Check the INPUT OK LED
for more information.
High Capacity
DIP=0 (60 W Input)
2+2
2240 W
4800 W
DIP=1 (70 W Input)
2+2
2440 W
5200 W
57