Srx5K-Scb4 Leds - Juniper SRX5600 Hardware Manual

SRX5K-SCB4 LEDs

Table 25 on page 78 describes the SCB4 LEDs and their states.
Table 25: SRX5K-SCB4 LEDs
Label Color
OK/FAIL Green
Red
–
FABRIC
ACTIVE Green
ONLY Green
LINK (XGE Green
port)
–
GPS Green
Yellow
State
On steadily
On steadily
Off
On steadily
On steadily
On steadily
Off
On steadily
Blinking
Description
SCB4 is online.
SCB4 has failed.
SCB4 is offline.
The switch fabric on this board is in Active mode.
The switch is in Fabric-Only mode.
SFP+ port is enabled and link is established.
SFP+ port is disabled or no link is established.
Indicates the status of the GPS clocking interface,
and the link is OK.
Activity on the clocking interface.
78