Table 48: Calculating System Thermal Output for SRX5600 Services Gateway with SCB3, IOC3, and RE2
Power Supply
SRX5600 AC standard-capacity
SRX5600 AC high-capacity
SRX5600 DC standard-capacity
SRX5600 DC high-capacity
SRX5600 Network Cable and Transceiver Planning
IN THIS SECTION
Routing Engine Interface Cable and Wire Specifications for the SRX5600 Services Gateway | 178
Signal Loss in Multimode and Single-Mode Fiber-Optic Cable for the SRX5600 Services Gateway | 179
Attenuation and Dispersion in Fiber-Optic Cable for the SRX5600 Services Gateway | 179
Calculating Power Budget for Fiber-Optic Cable for the SRX5600 Services Gateway | 180
Calculating Power Margin for Fiber-Optic Cable for the SRX5600 Services Gateway | 181
Routing Engine Interface Cable and Wire Specifications for the SRX5600
Services Gateway
Table 49 on page 179
lists the specifications for the cables that connect to management ports and the wires
that connect to the alarm relay contacts.
Thermal Output (BTUs per hour)
5202 * 3.41 = 17,738 BTU/hr
4968 * 3.41 = 16,940 BTU/hr
4512 * 3.41 = 15,385 BTU/hr
4512 * 3.41 = 15,385 BTU/hr
178