Srx5600 Services Gateway Grounding-Cable Lug Specification - Juniper SRX5600 Hardware Manual

NOTE: Additional grounding is provided to an AC-powered services gateway when you plug its
power supplies into grounded AC power receptacles.

SRX5600 Services Gateway Grounding-Cable Lug Specification

The accessory box shipped with the services gateway includes the cable lug that attaches to the grounding
cable (see Figure 23 on page
grounding points.
Figure 23: Grounding Cable Lug
End view
0.28
diameter
0.55
each hole
0.08 0.25 0.625
CAUTION:
attach a cable lug to the grounding and power cables that you supply. A cable with an
incorrectly attached lug can damage the services gateway.
NOTE: The same cable lug is used for the DC power cables.
62) and two UNC 1/4–20 screws used to secure the grounding cable to the
2.25
Crimp area
0.37 All measurements in inches
Before services gateway installation begins, a licensed electrician must
6 AWG conductor
62