Srx5600 Services Gateway Chassis - Juniper SRX5600 Hardware Manual

SRX5600 Services Gateway Craft Interface Online Buttons | 38
SRX5600 Services Gateway Craft Interface Alarm Relay Contacts | 41

SRX5600 Services Gateway Chassis

The services gateway chassis is a rigid sheet metal structure that houses all the other components (see
Figure 1 on page 30, Figure 2 on page
high, 17.45 in. (44.3 cm) wide, and 24.5 in. (62.2 cm) deep (from the front to the rear of the chassis). The
chassis installs in standard 800-mm (or larger) enclosed cabinets, 19-in. equipment racks, or telco open-frame
racks. Up to five services gateways can be installed in one standard (48 U) rack if the rack can handle their
combined weight, which can be greater than 1100 lb (500 kg). See
Specifications" on page 31
CAUTION:
an ESD strap to an ESD point and place the other end of the strap around your bare
wrist. Failure to use an ESD strap can result in damage to the services gateway.
WARNING:
operation.
30, and Figure 3 on page
for physical specifications for the SRX5600 Services Gateway.
Before removing or installing components of a services gateway, attach
The services gateway must be connected to earth ground during normal
31). The chassis measures 14.0 in. (35.6 cm)
"SRX5600 Services Gateway Physical
29