Srx5600 Services Gateway System Overview; Srx5600 Services Gateway Description - Juniper SRX5600 Hardware Manual

SRX5600 Services Gateway System Overview

IN THIS SECTION

SRX5600 Services Gateway Description | 25

Benefits of the SRX5600 Services Gateway | 26
SRX5600 Services Gateway FRUs | 26
SRX5600 Services Gateway Component Redundancy | 27
SRX5600 Services Gateway Description
The SRX5600 Services Gateway is a high-performance, highly scalable, carrier-class security device with
multi-processor architecture.
The SRX5600 Services Gateway is 8 rack units (U) tall. Three of these devices can be stacked in a single
floor-to-ceiling rack, for increased port density per unit of floor space.
The services gateway provides eight slots that you can populate with two Switch Control Boards (SCBs)
and six other cards of the following types:
Services Processing Cards (SPCs) provide the processing capacity to run integrated services such as
firewall, IPsec, and IDP.
Modular PIC Concentrators (MPCs) provide Ethernet interfaces that connect the services gateway to
your network.
I/O cards (IOCs) provide Ethernet interfaces that connect the services gateway to your network.
Flex IOCs are similar to IOCs, but have slots for port modules that allow you greater flexibility in adding
different types of Ethernet ports to your services gateway.
For detailed information about the cards supported by the services gateway, see the
and SRX5800 Services Gateway Card Reference at www.juniper.net/documentation/.
SRX5400, SRX5600,
25