Srx5600 Services Gateway Cooling System Description - Juniper SRX5600 Hardware Manual

Table 11: Alarm Relay Contact Electrical Specifications
Maximum Voltage
Maximum Current
Figure 9 on page 42 shows an example wiring diagram for a simple alarm reporting device. In this case the
device is a 12-volt light bulb that illuminates when the device encounters a condition that activates the
major alarm LED and relay contacts. The alarm relay contacts can also be used to activate other devices
such as bells or buzzers.
Figure 9: Example Alarm Reporting Device
SRX5600 Services Gateway Cooling System
Description
The cooling system consists of the following components:
Fan tray
Air filter
The cooling system components work together to keep all services gateway components within the
acceptable temperature range (see
The device has one fan tray and one air filter that install vertically in the rear of the device.
Current Type
AC
250
8 A
Figure 10 on page 43, Figure 11 on page
DC
30
44, and Figure 12 on page
42
44).