Table of Contents
Advertisement
3.1.7
LAN1 – 4 connectors
The ACU has four Ethernet connectors (type RJ45) for connecting to the GMU, PC/lap
tops, routers, wireless access points. The maximum cable length per connection is 100 m.
The Ethernet cable type must be CAT5, shielded.
Outline
Table 3-7: Ethernet connector, outline and pin assignment
1. Connect an Ethernet cable to Port 1 at the ACU and to the upper leftmost LAN
connector at the GMU.
2. Use Port 2 for user WAN (Internet etc.).
3. Connect an Ethernet cable to Port 3 and to the LAN connector on the left side of the
rear panel if you want to use the front LAN connector of the ACU for system control.
4. Use Port 4 (network 3) to connect the FV-110GX to the vessel's LAN
For more details about the LAN networks see To configure the LAN network on page 5-
23.
Pin
Pin function
1
Tx+
2
Tx-
3
Rx+
4
Not connected
5
Not connected
6
Rx-
7
Not connected
8
Not connected
:
Interfaces of the ACU
Wire color
White/orange
Orange
White/green
Blue
White/blue
Green
White/brown
Brown
3-5
Advertisement
Table of Contents
