Reset To Factory Default - Furuno FV-110GX Operator's Manual

7.1.2

Reset to factory default

You can reset the FV-110GX ADU and ACU to factory default.
Important
When resetting to factory default, the following settings are deleted:
• All satellite profiles
• All modem profiles
• Blocking zones
• Heading settings
• Azimuth adjustment
• Network setup
• User permissions
• ACU display: brightness setting
Figure 7-2: Web interface: ADMINISTRATION > Factory default, ADU and ACU
To reset to factory default settings, do as follows:
1. From the left navigation pane, select ADMINISTRATION > Factory default.
2. Click Reset to factory default.
Note
3. Click Clear event history if you want to clear all registered events.
Warning! Reset to factory default will delete all settings, including
satellite and VSAT modem profiles, blocking zones, network setup,
user permissions and ACU display brightness settings.
Calibration data for azimuth and cable calibration are not
reset during factory default.
To get support
7-5