Table of Contents
Advertisement
Troubleshooting
7.7
Troubleshooting
7.7.1
Overview
This section describes an initial check of the primary functions of the FV-110GX system,
and provides some guidelines for troubleshooting. Generally, if a fault occurs without any
obvious reason, it is always recommended to observe the LEDs and the ACU display
showing the active events. Possible failure states are shown in the web interface and the
display of the ACU:
• SAFE MODE (e.g. hardware error, missing communication link between the ADU and
ACU, excessive ship motion)
• Antenna data error (after exchange of modules, XIM)
• Antenna POST error (hardware error)
• ACU POST error (hardware error)
For information on the function of the LEDs, see Status signalling with LEDs and status
messages on page 7-15. For a list of all the error messages and warnings, see System
messages on page B-1.
7.7.2
Event list for troubleshooting
You can use the event list for troubleshooting. It is described in detail at Options for
support on page 7-2. You can download the event list as part of a diagnostic report.
7.7.3
Diagnostics report for troubleshooting
You can generate a diagnostic report containing results from the POST, all events and
system log information since the last reset to factory default. For more information see To
download diagnostic and statistics reports on page 7-3.
7.8
To return units for repair
Should your FV-110GX product fail, please contact your dealer. Your dealer will also
take care of any warranty issue.
7-20
Advertisement
Table of Contents
