Modem Profiles - Furuno FV-110GX Operator's Manual

3. Select a VSAT modem profile. The page automatically displays the parameters
available for the selected VSAT modem profile. For instructions how to add a VSAT
modem profile see Modem profile – New entry and Edit on page 7-13.
4. Enter the data for the satellite, if any. For satellite data see
5. Only for satellite profiles that use a VSAT modem profile with the Generic GX
modem: At Elevation cutoff enter the minimum elevation angle for the antenna.
• FCC (FCC §25.205): 5 degrees
6. Click Apply to save the settings for the satellite profile.
7.3.2

Modem profiles

On the page modem profiles you create, edit or delete modem profiles. You must add at
least one modem profile.
A modem profile contains all modem settings that are necessary for a successful
connection to the satellite. The data you have to fill in are provided by your VSAT service
and modem provider.
Modem profile – New entry and Edit
To add or edit a modem profile, do as follows:
1. Go to SETTINGS > Modem profiles and click New entry or Edit. The supported
modem profiles are listed in the drop-down list modem profile.
Figure 7-13: Web interface: SETTINGS, Modem profile – supported modems
2. Fill in a modem profile name of your own choice.
Figure 7-12: Web interface: SETTINGS, Modem profiles (example)
Satellite profiles and VSAT modem profiles
www.lyngsat.com.
7-13