Table of Contents
Advertisement
To verify the software update (ADU and ACU)
The software version can be viewed in the DASHBOARD window of the web interface.
After completing the software update procedure, the ACU will perform a POST (Power
On Self Test). When the POST has finished, the green Pass/Fail LED on the front of the
ACU must become steadily green.
1. Verify that the Pass/Fail LED is not red nor flashing orange once every 2 seconds.
2. Wait until the Pass/Fail LED is green.
3. Verify that the software update has been completed successfully. You find the
software version number in the DASHBOARD window of the web interface.
7.2.3
Software update (GMU)
The GMU detects automatically whether a software upgrade is needed. If yes, software
upgrade is done automatically via the satellite link. You can see the current software
version in the GMU web interface.
Figure 7-9: Verifying software update
Software update
x.xx
xx
7-11
Advertisement
Table of Contents
