Snmp Support - Furuno FV-110GX Operator's Manual

SNMP support

2. Wait until the system has rebooted and is operational again. The last active satellite
profile will be used.
5.6 SNMP support
The FV-110GX supports SNMP v2 requests to retrieve configuration and present settings.
SNMP is always enabled on all Ethernet interfaces. The SNMP community string is
public.
The FV-110GX offers via SNMP most of the data that are available from the
DASHBOARD web pages. Detailed documentation about supported OIDs can be found
in the FV-110GX MIB file.
The MIB entries are grouped in the following sections:
• System configuration
• Navigation coordinates
• Antenna pointing
• Dashboard and profile
• Tracking receiver
Note
To get the MIB file, do as follows:
1. Select HELPDESK.
2. Click the link Download MIB file.
3. Save the file on your computer.
5-42
None of the SNMP values need to be polled more often than
once a minute. Polling SNMP values more frequently will
impact the performance of the ACU.
Figure 5-30: Download of MIB file