Table of Contents
Advertisement
System messages
This appendix has the following sections:
• Event messages – overview
• List of ADU events
• List of ACU events
B.1
Event messages – overview
The FV-110GX detects events during
• POST (Power On Self Test) – a self test performed at every power-up.
• PAST (Person Activated Self test) – started in the web interface
• CM (Continuous Monitoring) – automatically performed while the system is in
operation.
When the FV-110GX detects an event that requires your action, it issues an event
message and the red Fail/Pass LED in the LED panel of the ACU is lit. As long as an
event is active, it is shown in the ACU display, the Control Panel and the web interface (in
HELPDESK > Event list or click the event icon on the DASHBOARD).
Active events and notifications are shown. As soon as the
Note
event is cleared, it is not displayed any longer. It is then
moved to the Notifications section. Notifications are cleared
after 24 hours.
State the Event ID when contacting your service partner.
The event description might contain a number of digits in brackets, e.g. (00000005). This
is supplemental information and used for service and diagnostics purposes.
Appendix B
B
B-1
Advertisement
Table of Contents
