Provisioning Key And Terminal Type; To Connect The Adu, Acu And Gmu - Furuno FV-110GX Operator's Manual

2.5.3

Provisioning key and terminal type

You need the Terminal Provisioning Key (TPK) and the Terminal Type to activate the
modem during commissioning with Inmarsat or other GX service providers. The TPK is
printed on the box label and the type label of the modem. The TPK is unique for each
Core Module (GMU). The terminal type describes the terminal and the manufacturer.
2.6

To connect the ADU, ACU and GMU

The following figure shows how to connect the ADU, ACU and GMU.
1. Connect the antenna cable to Antenna at the ACU and the antenna.
2. Connect Rx Out at the ACU to Rx In at the GMU with the supplied cable (75 Ohm
coax, F-F, 1 m).
3. Connect Tx In at the ACU to Tx Out at the GMU with the supplied cable (75 Ohm
coax, F-F, 1 m).
4. Connect RS-232 on the ACU to RS-232 (right) at the GMU.
5. Connect RS-422 on the ACU to RS-422 at the GMU.
6. Connect a PC at the LAN3 interface (Service port) of the ACU for access to the web
interface for configuration.
7. Connect LAN1 at the ACU to the upper left RJ45 connector at the GMU.
Figure 2-26: Connection between ADU, ACU and GMU
To connect the ADU, ACU and GMU
2-29