Brightness Of The Display; Power-Cycle Of The Acu And Adu - Furuno FV-110GX Operator's Manual

Gx terminal
Table of Contents

Advertisement

SATELLITE menu
BUC LO
EVENT
menu
<EVENT>
Example: EVENT 1/4*: This is the first event out of a list of 4 and there has been a
5.5.4

Brightness of the display

To adjust the brightness do the following:
1. Press and hold OK for a short moment until BRIGHTNESS XXX% is displayed
(XXX is the current brightness value).
2. Hold OK pressed + press
3. Release OK to leave the brightness menu.
5.5.5

Power-cycle of the ACU and ADU

To power cycle the ACU and ADU do the following:
1. Press and hold
reboots.
28.05 GHz, system hardware
Table 5-19: SATELLITE menu of the ACU (Continued)
In this menu all active events are listed. Use
through the active events.
Events can be of the type WARNING or ERROR.
If a new event occurs or there is a change in the event list while
you are in the EVENTS menu, a * is shown in the upper left
corner of the display, next to the menu name. Press OK to update
the EVENTS list, the * will be removed.
A > means the event text is longer than the display. Press to > to
see the remaining text.
Table 5-20: EVENTS menu of the ACU
change in the list. EVENT 1/4 will always be shown, the * indicates that
there has been a change.
for lighter or
and
until the ACU display shuts down and the ACU and ADU
Figure 5-29: Reset the system
Description
Description
for darker display.
:
Keypad and menus of the ACU
and
to go
5-41

Advertisement

Table of Contents
loading

Table of Contents