Editing Machine Data And Drive Parameters - Siemens SINUMERIK 840D sl Commissioning Manual

Machine and setting data

7.7 Editing machine data and drive parameters

7.7 Editing machine data and drive parameters
7.7.1 Editing hexadecimal values
You can use a bit editor to enter the required values for machine data in hexadecimal format.
Procedure
78
6. Press the "Select all" softkey to activate all display groups.
- OR -
Press the "Deselect all" softkey.
All checkmarks are removed and you can select individual display
groups.
1. Select the "Start-up" operating area.
2. Press the "Mach. data" softkey and select the required machine data
area (e.g. general machine data).
3. Position the cursor on the entry to be edited.
4. Press the <SELECT> or <INSERT> key.
The "Bit Editor" window opens.
All bits of the machine data item that have a description text are
displayed.
5. If you activate the "Display all bits" checkbox, all bits regardless of their
data type (8, 16 or 32 bits) are displayed. Activate the relevant bit.
6. Press the "OK" softkey. The setting is checked and an error message
may be output.
The window closes and you return to the machine data overview.
The new value is displayed in hexadecimal format.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)