Siemens SINUMERIK 840D sl Commissioning Manual page 664

Dialogs
4.2 Defining softkey menus
4.2.2 Language-dependent text
Overview
Language-dependent texts are used for:
● Softkey labels
● Headings
● Help texts
● Any other texts
The language-dependent texts for dialogs are stored in text files.
The text files are stored in the following directories:
● /user/sinumerik/hmi/lng/
● /oem/sinumerik/hmi/lng/
● /addon/sinumerik/hmi/lng/
Note
The text files must be saved in the same way as the project files.
e.g.:
/user/sinumerik/hmi/lng/[text file]
/user/sinumerik/hmi/proj/[configuration file]
alsc.txt
almc.txt
aluc.txt
The text files used during program runtime are specified in the easyscreen.ini file:
[LANGUAGEFILES]
LngFile01 = alsc.txt ;->alsc<_xxx>.txt (e.g. alsc_eng.txt)
LngFile02 = user.txt ;->user<_xxx>.txt (e.g.: user_eng.txt)
In this instance, the user.txt file has been chosen as an example of a text file. The name can
always be freely selected. Depending on the language of the texts within the file, the relevant
language code must be added using the following syntax. An underscore followed by the
relevant language identifier is added after the name e.g.
See also
List of language codes used in file names (Page 169)
46
Contains the language-dependent texts for the Siemens standard cycles
Contains the language-dependent texts for the manufacturer cycles
Language-dependent user texts
.
user_eng.txt
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1