Siemens SINUMERIK 840D sl Commissioning Manual page 492

Configuring cycles
22.5 Turning
MD24110 $MC_TRAFO_AXES_IN_1[ ]
[0] = 1
[1] = 3
[2] = 2
MD24120 $MC_TRAFO_GEOAX_ASSIGN_TAB_1[ ]
[0] = 1
[1] = 3
[2] = 2
MD24900 $MC_TRANSMIT_ROT_AX_OFFSET_1
= 0
MD24905 $MC_TRANSMIT_ROT_AX_FRAME_1
= 2
MD24910 $MC_TRANSMIT_ROT_SIGN_IS_PLUS_1
= 0
MD24911 $MC_TRANSMIT_POLE_SIDE_FIX_1
= 1
MD24920 $MC_TRANSMIT_BASE_TOOL_1[ ]
[0] = 0
[1] = 0
[2] = 0
TRANSMIT with real Y axis
MD24100 $MC_TRAFO_TYPE_1
= 257
486
Perpendicular to the rotary axis XC
Rotary axis (main spindle) C1
Parallel to the rotary axis ZC
1. channel axis X
2. channel axis Y
3. channel axis Z
Offset of the rotary axis for the 1st TRANSMIT transformation.
Axial offset of the rotary axis is taken into account during TRANSMIT 1.
Sign of the rotary axis for the 1st TRANSMIT transformation.
Limitation of working range in front of / behind the pole, 1st TRANSMIT.
Definition of transformation 1 in the channel: TRANSMIT main spindle.
Axis assignment for the 1st
transformation in the channel
Assignment of the geometry axes to
channel axes for transformation 1
Vector of the basis tool for the 1st
TRANSMIT transformation.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)