Siemens SINUMERIK 840D sl Commissioning Manual page 859

Overview of the main menu:
Main menu
Firmware Update
VNC Viewer
Diagnosis
Backup NCU Software and Data
Update NCU Software and Data
Restore NCU Software and Data
Modify NCU Settings
Service Shell
NCU operating system (IM7)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Description
Update BIOS:
PLC BIOS
•
FPGA
•
CBE30 Bootloader
•
Start a VNC Viewer
Starting a diagnostic function to display
network-connection data and data on the
system CompactFlash Card.
Backup system and user data on the USB
FlashDrive or network drive.
Upgrade the system from the USB
FlashDrive or network drive.
Restore system and user data from the
USB storage medium or network drive.
Change network settings
•
• Activate/deactivate HMI
Restore delivery condition of the
•
following components:
– HMI
– NCK
– PLC
– Drive
A Service Shell is opened in order to input
service commands.
Service and diagnostics
3.1 Creating a service system
Reference to chapter/manual
This is how you update the firmware
(Page 80)
Calling the VNC Viewer (Page 89)
Performing system diagnostics
(Page 84)
Backup data via the service menu
(Page 68)
This is how you update the software
(Page 82)
Backup data via the service menu
(Page 68)
This is how you change the system
settings (Page 86)
Backing up data via the service shell
(Page 75)
Service Commands (Page 35)
63