Siemens SINUMERIK 840D sl Commissioning Manual page 195

Example
"sltmlistconfig.xml" or "sltmturninglistconfig.xml" file:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<CONFIGURATION>
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
<!-- **** Identifier for the configuration of the lists *** -->
<LISTCONFIGURATION>
<!-- **** OEM tool list *** -->
<SlTmTooloemForm>
<!-- **** Enabling the OEM tool list *** -->
<Enabled value="true" type="bool" />
<!-- **** Columns 1 to 5 have already been assigned default values. *** -->
<!-- **** Column 6 *** -->
<COLUMN6>
<!-- **** For all tool types *** -->
<TOOLTYPE_ALL>
<!-- **** Display OEM tool parameter 1 *** -->
<Item value="ToolUser_1" type="QString" />
</TOOLTYPE_ALL>
</COLUMN6>
<!-- **** Column 7 *** -->
<COLUMN7>
<!-- **** For all tool types *** -->
<TOOLTYPE_ALL>
<!-- **** Priority tool, own parameter *** -->
<!-- **** Display OEM tool parameter 2 bit 0 *** -->
<Item value="PriorTool" type="QString" />
</TOOLTYPE_ALL>
</COLUMN7>
<!-- **** Column 8 *** -->
<COLUMN8>
<!-- **** For all tool types *** -->
<TOOLTYPE_ALL>
<!-- **** Display OEM cutting edge parameter 1 *** -->
<Item value="EdgeUser_1" type="QString" />
</TOOLTYPE_ALL>
</COLUMN8>
</SlTmTooloemForm>
</LISTCONFIGURATION>
<!-- **** Identifier for the configuration of own parameter *** -->
<PARAMETERCONFIGURATION>
<!-- **** Change OEM tool parameter 1 *** -->
<ToolUser_1>
<!-- **** Column width *** -->
<Width value="36" type="int" />
Tool management
12.4 Examples
189