Deactivating A Warning - Siemens SINUMERIK 840D sl Commissioning Manual

<message>
<source>700002/PLC/PMC</source>
<translation>Text with three 16-bit INTEGER parameters: @1%X@, @2%u@, @3%b@</translation>
</message>
<message>
<source>700003/PLC/PMC</source>
<translation>Text with four parameters: @1%X@, @2%u@, @3%r@, @4%b@</translation>
</message>
</context>
</TS>
13.5

Deactivating a warning

Generally, alarms/messages are not used without alarm texts. If the alarm text is missing,
the warning "No text available" is output.
To deactivate the warning, add the <ControlFlags> area to your "slaesvcadapconf.xml"
configuration file.
You can copy this area from the original file. The "slaesvcadapconf.xml" file is in the
following directory: /siemens/sinumerik/hmi/base
Setting
In the <MissingTextWarning type="bool" value="FALSE"/> tag, deactivate/activate the
warning.
Entry
TRUE
FALSE
Example
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<CONFIGURATION>
</CONFIGURATION>
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Meaning
The warning is displayed.
The warning is deactivated.
<ControlFlags>
<MissingTextWarning type="bool" value="FALSE"/>
</ControlFlags>
Configuring alarms
13.5 Deactivating a warning
231