Siemens SINUMERIK 840D sl Commissioning Manual page 248

Collision avoidance
14.6 Changing and adapting the machine model view
Procedure
...
...
Note
Working with a mouse
Using a mouse, you have the option of rotating and shifting the model in the graphic view.
• Move the model with the left-hand mouse key pressed to shift the model.
• Move the model with the right-hand mouse key pressed to rotate the model.
242
1. Position the cursor in the graphic.
2. Press the "Rotate view" softkey.
3. Press the "Arrow right", "Arrow left", "Arrow up", "Arrow down", "Arrow
clockwise" or "Arrow counter-clockwise" softkeys to change the position
of the machine model.
- OR -
Press the keys >Cursor right>, <Cursor left>, <Cursor top> or <Cursor
bottom>, to shift the machine model.
- OR -
Keep the <Shift> key pressed and rotate the machine model in the
desired direction using the appropriate cursor keys.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)