Siemens SINUMERIK 840D sl Commissioning Manual page 490

Configuring cycles
22.5 Turning
MD24810 $MC_TRACYL_ROT_SIGN_IS_PLUS_1
= 1
MD24820 $MC_TRACYL_BASE_TOOL_1[ ]
[0] = 0
[1] = 0
[2] = 0
Cylinder surface transformation with groove side offset
MD24300 $MC_TRAFO_TYPE_3
= 513
MD24310 $MC_TRAFO_AXES_IN_3[ ]
[0] = 1
[1] = 3
[2] = 2
[3] = 6
MD24320 $MC_TRAFO_GEOAX_ASSIGN_TAB_3[ ]
[0] = 1
[1] = 3
[2] = 2
MD24800 $MC_TRACYL_ROT_AX_OFFSET_1
= 0
MD24805 $MC_TRACYL_ROT_AX_FRAME_1
= 2
484
TRACYL main spindle
Perpendicular to the rotary axis XC
Rotary axis (main spindle) C1
Parallel to the rotary axis ZC
Parallel to the cylinder surface and perpendicular to the rotary axis ZC
1. channel axis X
2. channel axis Y
3. channel axis Z
Sign of the rotary axis for the 1st TRACYL
transformation.
Vector of the basis tool for the 1st TRACYL
transformation.
Definition of the 3rd transformation in the
channel
Axis assignment for transformation 3
Assignment of geometry axes to channel
axes for transformation 3.
Offset of the rotary axis for the 1st TRACYL
transformation.
Axial offset of the rotary axis is taken into
account during TRACYL.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)