Display Spl Signals - Siemens SINUMERIK 840D sl Commissioning Manual

21.2.3

Display SPL signals

Safe programmable logic
Variables
$A_INSE (P)
$A_OUTSE (P)
$A_INSI (P)
$A_OUTSI (P)
$A_MARKERSI (P)
$A_PLCSIIN
$A_PLCSIOUT
Bit
Available signals/values
DCC fill level
DCC status
DCC control word
SPL booting state
SPL started up
SPL interfaces have been parameterized
SPL program file SAFE.SPL loaded
NCK and PLC state
Interrupt for PLC start should be assigned
Interrupt has been assigned for PLC start
Interrupt processing for SPL start called
Interrupt processing for SPL start terminated
SPL start implemented using PROG_EVENT mechanism
SPL started via AUTO start
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
4. Press the "Axis +" or "Axis -" softkey.
The values of the next or the previous axis are displayed.
- OR -
Press the "Axis selection" softkey and select the desired axis directly
from the displayed list of available axes.
$A_INSE (P) - corresponds to simultaneous selection of:
$A_INSE (upper line, origin of the NCK) and
$A_INSEP (lower line, origin of the PLC)
comp. $A_INSE (P)
comp. $A_INSE (P)
comp. $A_INSE (P)
comp. $A_INSE (P)
comp. $A_INSE (P)
comp. $A_INSE (P)
Selection of an 8-bit area of the selected signal.
Safety Integrated
21.2 Safety Integrated diagnostics
441