Editing The Master Data Of A Machine - Siemens SINUMERIK 840D sl Function Manual

6 Administration
6.1 Management of the organization
Function
machine
Exporting
Upgrade
Delete
Select entire
page
Select all
Exporting machines
A machine must be switched into an inactive state to export a machine,
configurations and data. This is a function setting that can be selected and
deselected from the PC for every machine. Export is only for your "own machines"
(no external machines that have been released).
Destination data must be specified for the export. These include the name of the
server to which the export should be imported (generally an eP satellite) and the
organization on the server.
Fig. 6-5: Exporting and importing a machine
The export and import overview lists correspond to those that are described for
exporting and importing.

6.1.4 Editing the master data of a machine

6-280
Description
displayed again separately, as described above.
Launches the export function when multiple
machines are selected.
Launches the conversion from Version 3 to
Version 4 when multiple machines are selected.
Launches the machine deletion procedure when
multiple machines are selected.
Enables easy selection of all machines on the
current page (up to 200).
Enables easy selection of all machines, even
those not visible on the current page.
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Type
ACTION
ACTION
ACTION
SELECTION
SELECTION
© Siemens AG 2006-2013 All Rights Reserved
03/2013