Various Machine Model Views - Siemens SINUMERIK 840D sl Commissioning Manual

14.6.4

Various machine model views

For the graphic display of the machine model, you can choose between various views. This
allows you to always optimally view the actual machining situation.
The following views are available:
● From the front
● Side view
● Top view
Precondition
● You are in the graphic machine model editor.
● The "Graphic" and "Autozoom" softkeys are active.
Procedure
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
View parallel to the Y axis
View parallel to the X axis
View parallel to the Z axis
1. Position the cursor in the graphic
2. Press the ">>" and "Views" softkeys.
2. Press the "From front" softkey if you wish to view the machine model
from the front.
- OR -
Press the "Side view" softkey if you wish to view the machine model
from the side.
- OR -
Press the "Top view" softkey if you wish to view the machine model from
the top.
14.6 Changing and adapting the machine model view
Collision avoidance
243