Siemens SINUMERIK 840D sl Commissioning Manual page 879

3. In order to check which software version contains the tgz file, first select the tgz file, then
4. Select the appropriate tgz file and confirm with "Ok".
Completion
The system must be restarted in order that the new data become effective.
See also
The procedure for "Update system software from network drive" is essentially the same. In
addition, you connect to a network drive: This is how you connect to a network drive
(Page 64)
For a complete backup of the system: This is how you install a complete system backup
(Page 73)
NCU operating system (IM7)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
press "Show version".
The following information is output:
Figure 3-14 Version information
A message is output after the update has been successfully completed.
Service and diagnostics
3.5 Updating the software
83