Service and diagnostics
18.4 Displaying the time required for synchronized actions
18.4
Displaying the time required for synchronized actions
General machine data
If you wish to display the utilization evaluation across synchronized actions in the operating
area "Diagnostics", "System utilization", then set the general machine data as follows:
MD11510_$MN_IPO_MAX_LOAD
> 0
= 0
18.5
Creating screenshots
You can create screenshots of the current user interface.
Each screenshot is saved as a file and stored in the following folder:
/user/sinumerik/hmi/log/screenshot
Procedure
Ctrl + P
Copy file
326
The time required for synchronized actions is activated and the line "Time required for
synchronized actions" is displayed with the actual values.
Display deactivated (default value)
Press the <Ctrl+P> key combination.
A screenshot of the current user interface is created in .png format.
The file names assigned by the system run in ascending order from
"SCR_SAVE_0001.png" to "SCR_SAVE_9999". You can create up to 9,999
screenshots.
1.
Select the "Start-up" operating area.
2.
Press the "System data" softkey and open the specified folder.
As you cannot open screenshots in SINUMERIK Operate, you must
copy the files to a Windows PC either via "WinSCP" or via a USB-
FlashDrive.
You can open the files using a graphics program, e.g. "Office Picture
Manager".
Maximum permissible IPO load
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)