4-7
DISASSEMBLY
I
ENG
I" ..
I
2. Remove:
- Gasket (Cylinder)
CD
- Dowel pin
(2)
-O-ring
®
PISTON
NOTE:
_
With the engine mounted, the piston can be main-
tained by removing the following parts.
-Seat
-Fuel tank
• Exhaust pipe
-Cylinder head
-Cylinder
1. Remove:
- Piston pin clip
CD
NOTE:
_
Before removing the piston pin clip, cover the
crankcase with a clean rag so you will not acciden-
~
tally drop the clip into the crankcase.
~
2. Remove:
- Piston pin
CD
-Piston
(2)
NOTE:
_
Before removing the piston pin, deburr the clip
groove and pin hole area. If the piston pin groove
is deburred and piston pin is still difficult to re-
move, use Piston Pin Puller (YU-01304).
Do not use a hammer to drive the piston pin
out.