ELECTRICAL STARTING SYSTEM
I
ELEC
I
a
I
*
n.
STARTER MO:rOR DOES NOT MOVE.
4. Starter relay test:
Starter relay is faulty. Replace it.
- Disconnect the starter relay coupler
CD
(Blue/White and Red/White) from the
starter relay.
-Connect the Blue/White lead
@
to Bat-
tery
(+)
terminal, and Red/White lead
®
to Battery (-) terminal (Starter relay
side); Use jumper leads
@.
STARTER MOTOR MOVES.
5. Starter relay circuit test:
.Connect the starter relay coupler to the
wireharness.
.Turn the IIENGINE STOP" switch to
"RUN" and main switch to liON".
• Disconnect starting circuit cut-off relay
coupler (Blue/White, Black/Yellow, Sky
blue, Brown lead),
• Connect the starting circuit cut-off relay
coupler terminals. (Blue/White
@
and
Brown
®
lead-wireharness side); Use
the jumper lead
@ .
• Push the IISTART" switch in.
STARTER
MOTOR
DOES
NOT
MOVE.
The following part{s) is faulty.
• Main switch
."ENGINE STOP" switch
.IISTART" switch
Replace faulty part(s).
Refer to IISIGNAL SYSTEM" section
STARTER MOTOR MOVES.
7-18